NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Impossible to use premium features: Smart Parental Controls App Error on Activation ("SPC-ACT-FAIL")
I just purchased the premium plan for the "Smart Parental Control" app. I’m trying to use this on a newish iPhone and when I go to "Unlock Premium" I am taken to a SPC Activation screen to set up. The app goes through about 60 seconds of "setting up..." until I get a fatal error. The message says "Smart Parental Control activation is failed.Please try it again, or dismiss this message and try it later (code: SPC-ACT-FAIL)."
I have attempted over the course of several days to set this up with the same error. I have rebooted my router and modem several times. I also downgraded to the previous firmware version as suggested by someone on chat support. Nothing is working.
Hello NETGEAR Community!
We just released a patch this morning that should resolve this issue. I was also impacted by this error and can confirm, once I attempted to enable Smart Parental Controls (SPC) again and followed the pompts it worked as expected.
If you haven't done so already, please log into your Orbi app and tap the Smart Parental Controls tile to enable this feature.
If anyone is still having an issue with activation please let me know and we can continue to debug this issue further.
I appreciate everyone for your effort and patience in getting this issue resolved.
Best Regards,
Christine T.
88 Replies
Replies have been turned off for this discussion
I just purchased the premium plan for the "Smart Parental Control" app. When I go to "Unlock Premium" I am taken to a SPC Activation screen to set up. The app goes through about 60 seconds of "setting up..." until I get a fatal error. The message says "Smart Parental Control activation is failed.Please try it again, or dismiss this message and try it later (code: SPC-ACT-FAIL)." I have attempted over the course of several days to set this up with the same error. I have rebooted my router and modem several times.
I tried calling customer support and have been swapped amongst three technicians and put on hold for 40 minutes. I don't even know how to cancel billing for the yearly subscription if this cannot get fixed.
You might get more help here:
NETGEAR Smart Home Parental Controls - NETGEAR Communities
I doubt if there are many subscribers to that service who hang out in this section.
- Have the same issue… tried factory reset… did not help… spent an hour on phone with support… they were nice but did not have the error code in their knowledge base… strange that they released a product and do not know the error codes… hope they give everyone a two month free trial…
- I have the same issue but with the trial of parental controls.. RBR750. Gives the same two screens you mentioned. Images attached. Support said to do a factory reset which I did. This did not fix the problem. They need to fix in their system and give us a free year for the hassle this has been. If it’s not resolved by the end of the weekend, I’ll return the system and go back to Roqos.
- i have the same problem. the support link doesn't work. my trial period clock is running and i cant use the feature…
- as info, shortly after posting this, i was able to activate SPC. i didn't do anything different, it just worked eventually…
as info, i like the interface and functionality so far. i haven't tested it fully yet, but on the surface, these are the exact features i have been looking for…
Hello nickd3ps and jhermsmeyer
I am sorry to hear you're experiencing an issue with activating the Smart Parental Controls feature. Thank you for reporting this! Please private message me with the serial number of your NETGEAR Product along with the registered email and I'll escalate this issue to our internal team to investigate this further.
I look forward to hearing from you.
Thank you for your patience!
ChristineT
Same issue. "SPC-ACT-FAIL".
Also no pricing info when I activated or a method of cancelation. But first thing is first. THE ACTIVATION IS NOT WORKING!!!! Waited a year + for this product. Comeon Netgear get it together.
- Same issue. What’s the story?
What is really strange is that last years "Best Review" RBR850 Mesh Router is not even listed on this Model Number list here. Has it been deleted from memory at Netgear/Orbi? That is the one I have. Perhaps that is why the parental control does not work...if even Netgear acts like it does not exist?
FlyingDoc wrote:
What is really strange is that last years "Best Review" RBR850 Mesh Router is not even listed on this Model Number list here. Has it been deleted from memory at Netgear/Orbi? That is the one I have. Perhaps that is why the parental control does not work...if even Netgear acts like it does not exist?
One of the frustrating aspects of the community forum is that the product list is not kept up to date. Perhaps with the pandemic causing so much disruption, there is no one currently assigned to this task? Yes, the RBR850 is a current product.
That said, there certainly appear to be issues with the Smart Parental Controls, as evidenced by the growing number of posts in the forum.
OP here.
An update. I have finally given up on trying to get any resolution on activating this app. I was really looking forward to using it. But customer service promised to call back, which they have not. I was also told this issue would be prioritized for resolution. It has not.
I've been paying for this app since September 11th but just now cancelled and got a refund. If others want to do the same, the number is 866-202-8242.
Also, as an aside, Amazon allows you to trade-in your Netgear router for a discount on one of their eero mesh systems. Because the parental smart app is unuseable on Netgear, I did just that.
Thanks for sharing. I will be swapping mine out as well. I messaged and called Netgear. No help, no callbacks, no email response. So frustrating. I have waited for PC, tried and given them every opportunity. One would think they want to make money and sell usefull products that work. I for one have lost confidence and if I can avoid it will not be buying their products again. :(
Actually engaged someone in support and they advised me to factory reset and reinstall the firmware. And of course it still doesn't work. I suspect this is vaporware. Even better, they closed my ticket immediately after telling me I needed to update it. Netgear is completely down the tubes at this point. BBB complaint is next.
Hello NETGEAR Community!
We just released a patch this morning that should resolve this issue. I was also impacted by this error and can confirm, once I attempted to enable Smart Parental Controls (SPC) again and followed the pompts it worked as expected.
If you haven't done so already, please log into your Orbi app and tap the Smart Parental Controls tile to enable this feature.
If anyone is still having an issue with activation please let me know and we can continue to debug this issue further.
I appreciate everyone for your effort and patience in getting this issue resolved.
Best Regards,
Christine T.
Hi there - still can't use the SPC and I've paid for premium. It's seeing all of my devices but it is not blocking, tracking or pausing anything. Basically it's not doing anything. What can be done to get this to work or refunded?
I would reach out to NG support:
https://www.netgear.com/support/#
tp28173 wrote:
Hi there - still can't use the SPC and I've paid for premium. It's seeing all of my devices but it is not blocking, tracking or pausing anything. Basically it's not doing anything. What can be done to get this to work or refunded?
- I am still having this problem. Incredibly frustrating being sold a bill of goods
I would reach out to NG support:
https://www.netgear.com/support/#
Fixmyorbi wrote:
I am still having this problem. Incredibly frustrating being sold a bill of goods
I recently subscribed for the parental controls but it has the same error activating that was previously described. I understand that there is a patch but don't know if that updates automatically? I've tried multiple times over the last couple of days and it is telling me that there is an error.
thoughts?
I've the same problem. No way to activate premium features
I would reach out to a forum moderator:
MatteoPessina wrote:
I've the same problem. No way to activate premium features
I would not waste time with forum moderators. They say the same thing over and over again. "Please contact me privately for help." They never help or helped (me at least). Never got a response from them. I am not sure why the same old tired post is getting put up over and over ad nauseum. This product borderlines on a money making skeme. Pay up for something that does not work. I have oppened a ticket with the FCC and with the BBB. I would encourage everyone with problems to do the same rather than wasting time with "robot" moderatores and nice but useless netgear help line.
- Is there any update here from netgear? Resolution time?
- I have paid for Smart Parent Control but keep getting error message SPC-ACT-FAIL? How to I resolve?
If it's for the 50 series Orbi, try what this user did to get it working:
RhonnieK wrote:
I have paid for Smart Parent Control but keep getting error message SPC-ACT-FAIL? How to I resolve?
- I got it working. I had to reset the router which gave no results. Then I had to uninstall and reinstall the app. Which was a disaster. Mostcof the tiles and functions vanished. Including parental controls. Then over the next few days misding tiles and functions returned and everything was working. I still haven't had a chance to use it but it let me set it up which it wasn't doing before.
Good luck everybody. Thank you to those who responded. And have a great new year!
