NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

chainlinc's avatar
Sep 13, 2017
Solved

6.8.0 breaks FTP

After upgrading to OS6 6.8.0, scans from my Lexmark MX410de multi-function scanner fail if the .pdf file being written to is not altered within about 3 seconds. This is a new failure that did not exist with the past ReadyNAS firmwares. Let me explain...

The scanner starts a scan and creates a .pdf file at the beginning of the scan. As the scan progresses, the .pdf file is 'added to' by the additional pages as they are scanned. If there is a delay of more than three seconds, such as between pages if the auto-document-feeder is not used, or by very high resolution scans, the scanner responds with a connection error. There was no trouble with prior firmwares. There is no trouble if I use another FTP server.

 

My ReadyNAS and the scanner are both assigned reserved IP addresses by the DHCP server, and the FTP server is addressed by IP address.

 

This occurs whether or not anti-virus is turned on on the ReadyNAS. File search is turned off. There are terabytes of free space on the ReadyNAS.  Single pages (or multiple pages via the auto-document-feeder) at low or medium resolution work fine.

 

Any ideas? Has a timout or file-lock property been adjusted down in the current firmware?

  • We traced the cause of the issue, and have posted our findings to the ProFTPD bugzilla report.  We should be able to get it fixed for the next 6.9.0 Beta.

19 Replies

Replies have been turned off for this discussion
  • Marty_M's avatar
    Marty_M
    NETGEAR Employee Retired

    Hello chainlinc,

     
    I would like to verify the NAS and scanner is on the same local network? The 6.8.0 firmware did not made any changes on ftp access on the NAS. You have mentioned that if the resolution is set to low or medium it does work fine. There is a possibility that the NAS is lacking resources in scanning higher resolution files. Do you have ftp rate limit or ftp permission set on the shares that the scanner access. Can you provide the complete logs of the NAS, you may use file sharing website like wikisend and just PM the download link. 
     
    Regards,
    Marty_M 
    NETGEAR Community Team

    • chainlinc's avatar
      chainlinc
      Guide

      Both the NAS and the scanner are on the same local, wired network, both receiving a reserved IP address from the DHCP server.

      Even low resolution scans fail when they are multiple page and the ADF is not used (the pause between placing the next page triggers the failure).

      I set up a temporary FTP server on a Windows 10 Pro computer and the scanner scans to it just fine.

      There is no FTP rate limit set. Permissions should not be an issue, as scans without a delay between pages work fine.

      I will PM the logs.

      • chainlinc's avatar
        chainlinc
        Guide

        Below are three entries from the proftpd.log file just created:

        Entry 1 shows a successful scan to the FTP server.

        Entries 2 and 3 are a failed scan and the error.

        Does anyone know what the last character (c or i) in the first two entries represents?

         

        Mon Sep 18 09:38:50 2017 6 192.168.2.125 1166589 /var/ftp/shared_files/Documents/Online_Statements/_From_Scanner/Scanned_2017-09-18-103840.pdf b _ i r dtesluk ftp 0 * c

         

        Mon Sep 18 09:39:11 2017 14 192.168.2.125 1048609 /var/ftp/shared_files/Documents/Online_Statements/_From_Scanner/Scanned_2017-09-18-103853.pdf b _ i r dtesluk ftp 0 * i

         

        2017-09-18 09:39:15,690 rnpro proftpd[4729] 127.0.0.2 (192.168.2.125[192.168.2.125]): notice: user dtesluk: aborting transfer: Interrupted system call

    • chainlinc's avatar
      chainlinc
      Guide

      chsu83 wrote:

      did you found a fix for that problem?


      chsu83,

      Sadly, I have not yet found a fix for the ReadyNAS.

      • chsu83's avatar
        chsu83
        Luminary

        Puh.. can we contribute somewhere the logs or somewhat?

        Unfortunately I don't see any correction in the Beta's.. how should they.. in the bugreport http://bugs.proftpd.org/show_bug.cgi?id=4319 is also no solution available.

        If anybody (e.g. Netgear) has an account at proftpd, and I can contribute some files please inform me. (Perhaps I need to know how to start proftpd on readynas in verbose). Because there the os (where the failure is known) is only FreeBSD mentioned. Could be helpful to inform them about ReadyNAS Linux.

         

        to specify things more precisely:

        I'm using Readynas with 6.8.0

        FTP works from Filezilla

        But is broken from an OKI C5550 MFP

    • Marty_M's avatar
      Marty_M
      NETGEAR Employee Retired

      Hello chainlinc,

       

      There is a big possibility that the bug from the proftpd 1.3.6 might be causing the problem. It does appear that it is being look onto right now and there is chance that fix might be available soon.

       

      Regards,
      Marty_M 
      NETGEAR Community Team

      • Skywalker's avatar
        Skywalker
        NETGEAR Expert

        We traced the cause of the issue, and have posted our findings to the ProFTPD bugzilla report.  We should be able to get it fixed for the next 6.9.0 Beta.

NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology! 

Join Us!

ProSupport for Business

Comprehensive support plans for maximum network uptime and business peace of mind.

 

Learn More