Orbi WiFi 7 RBE973

Re: R7000 New Firmware 1.0.6.28 released

LeKeiser
Luminary

Re: R7000 New Firmware 1.0.6.28 released

Hello Ankydu,

 

What I would do is flush your dns (ipconfig /flushdns), then launch FF,  clear the cache of FF, remove all the cookies, and restart FF safe mode.

Let's see what's happening then.

Message 126 of 321
ankydu
Guide

Re: R7000 New Firmware 1.0.6.28 released

 Have already tried that. 

Infact I also did a fresh installation of opera browser but still same result.
Message 127 of 321
LeKeiser
Luminary

Re: R7000 New Firmware 1.0.6.28 released

Are you using an antivirus program? If it's not too much, can you uninstall it totally?

Message 128 of 321
ankydu
Guide

Re: R7000 New Firmware 1.0.6.28 released

I have kaspersky Internet security, which I cannot uninstall, but I disabled it's protection and exited all its processes from the task manager, just to be sure. Secondly when booting in safe mode with networking kaspersky is not allowed to load by windows, there as well can't access the router.
Message 129 of 321
seanmacaoidh
Aspirant

Re: R7000 New Firmware 1.0.6.28 released

Hi All, i am going to revert to a previous firmware. I am just wondering which one you would recommendas the most stable and fastest through put

as I am receiving a 4G signal for my broadband and this 1.0.6 version has destroyed my speed 

1.0.5

1.0.3

or which version or 1.0.4

 

and the easiest way to revert

thanks in advance

Message 130 of 321
scornell2288
Guide

Re: R7000 New Firmware 1.0.6.28 released

Here is the fix to all or our problems. I tested this last night.

 

Go here:

http://www.linksysinfo.org/index.php?threads/asuswrt-merlin-on-netgear-r7000.71108/

 

Sign up for account.

 

Download latest version.

 

The recommended procedure:
1. Reset your router to factory defaults via (Push reset button for 8 seconds on the R7000) Log into 192168.1.1 follow default steps.
2. Flash the R7000_xxx.xx_x.chk file via the web interface.
3. Do another factory reset via the new web interface.
4. Configure everything else.

 

I did this last noght it is a very stable and really cool Firmware. My wireless range and speeds increased as well. This firmware was built for the R7000

Message 131 of 321
Hot54321
Apprentice

Re: R7000 New Firmware 1.0.6.28 released

It is a very stable version! I get more bandwith/speed with the asus-merlin firmware!!

It has even bandwith extender.. That means the signal output gets stronger with a slider. Default is 50%. I set it up to 100%
Message 132 of 321
GodZZila
Aspirant

Re: R7000 New Firmware 1.0.6.28 released

Hardware NAT supported?
Message 133 of 321
Hot54321
Apprentice

Re: R7000 New Firmware 1.0.6.28 released

Don't know... I gues it is. But dont know if it's 100%
Message 134 of 321
chopin70
Virtuoso

Re: R7000 New Firmware 1.0.6.28 released

@ankydu

In fact, your network configuration looks fine under windows with ipconfig /all

If you really did all what you said, and mainly hard reset + connect only one cable between PC and Router, maybe something else corrupted in router or windows. Again, on first hard reset with this 1.06, I had to connect to the WAN from my PC. There was no way to connect using the LAN. After that, using the LAN worked. Why? I have no clue. Just try it as a last chance

 

If a fresh install of windows is able to connect to the router, then it is an issue with your current windows install, else it is something fishy in router. Provided hardware interface (adapter and cable) is fine!

For windows, many things can affect it. Did you try to look if 192.168.1.(0-255) range is redirected in hosts file ? (%SystemRoot%\System32\drivers\etc\hosts)

 

If you excluded a windows issue by a fresh install, let's say, it is sad that no Netgear dev ever replies for support here. Their NAS forum is extremely well supported by Team devs. Here, users are left alone it seems

Message 135 of 321
Hot54321
Apprentice

Re: R7000 New Firmware 1.0.6.28 released

It is, no netgear devp are here around... Bad support
Message 136 of 321
WhiskeyAlpha
Aspirant

Re: R7000 New Firmware 1.0.6.28 released

I also had the issue of no devices being able to connect to my 2.4GHz after this update.  Rolling back to the previous firmware did not resolve the issue, but rolling back to Version 1.0.4.28 resolved the issue.

Message 137 of 321
oertje
Aspirant

Re: R7000 New Firmware 1.0.6.28 released

I have updated it but now no 2.4ghz accespoint I have no wifi only at 5ghz

 

what can I do?

Message 138 of 321
scornell2288
Guide

Re: R7000 New Firmware 1.0.6.28 released

 
Windows
 
Re: R7000 New Firmware 1.0.6.28 released

Here is the fix to all or our problems. I tested this last night.

 

Go here:

http://www.linksysinfo.org/index.php?threads/asuswrt-merlin-on-netgear-r7000.71108/

 

Sign up for account.

 

Download latest version.

 

The recommended procedure:
1. Reset your router to factory defaults via (Push reset button for 8 seconds on the R7000) Log into 192168.1.1 follow default steps.
2. Flash the R7000_xxx.xx_x.chk file via the web interface.
3. Do another factory reset via the new web interface.
4. Configure everything else.

 

I did this last noght it is a very stable and really cool Firmware. My wireless range and speeds increased as well. This firmware was built for the R7000

Message 139 of 321
ankydu
Guide

Re: R7000 New Firmware 1.0.6.28 released

I am done with this buggy, worst than alpha firmware. Firstly if not being able to open my router page wasnt enough now all my android phones and tablet refuse to detect my HP AIO printer on this firmware, only my windows devices with netgear software are able to detect it. With great disappointment from netgear, I am reverting back to 1.0.4.30 where atlest the things I need work if not everything.

Message 140 of 321
mveksler
Tutor

Re: R7000 New Firmware 1.0.6.28 released

Can we ever get ICMPv6 issue resolved on R7000.

I still can not enable IPv6 on the router because if i do, the dns and host lookups take forever and pages load very slow and timeout at times. 

Message 141 of 321
Masks
Initiate

Re: R7000 New Firmware 1.0.6.28 released


@jflorance wrote:

@Masks wrote:

Same here, very annoying. 2.4G network seems to have a weaker signal too. @netgear support: can we expect an fix soon? Thanks!


@jflorance wrote:

I updated to 1.0.6.28 yesterday and have lost access to my 2.4G network. I have both 5 and 2.4 running and a 2.4G guest network . The guest network seems to work fine. I've tested it with on Android device and 2 Windows laptops. I'll entertain any workarounds or solutions. 

 

Probably doesn't matter but I turned off Arlo right after the update.


 



Just to be clear, I had problems connecting to 2.4Ghz after applying the firmware update. Once I did a factory reset, I could connect both bands. I have not seen any changes in signal strength between 5Ghz and 2.4Ghz since the update. In fact, my 2.4 is now about 4-6 db stronger in my basement. It was stronger before but I don't know by how much.

 

I am staing with 1.0.6.28 for now. 


Thanks for the tip, jflorance! Factory reset did it for me. 1.0.6.28 still in place and no apparent problems remain.

 

Greetings!

Message 142 of 321
tarund
Apprentice

Re: R7000 New Firmware 1.0.6.28 released

I had a similar issue as well on my desktop with Kaspersky. I had to uninstall it completely in order to be able to connect to my router. Pain in the butt, I tell ya. I'm on 1.0.4.30 as well but going to try the latest and do the factory reset. Let's see where it takes me.

Message 143 of 321
Killhippie
Prodigy

Re: R7000 New Firmware 1.0.6.28 released

100% is the same as Netgears 100% the R7000 is already broadcasting at the edge of legal power requirements with stock firmware.
Message 144 of 321
Killhippie
Prodigy

Re: R7000 New Firmware 1.0.6.28 released

An interesting thing is when accessing it using Google Chrome, Chrome reports the connection having been "reset". This means the computer is connecting to the router but something is forcing a disconnect. But, sometimes it works and other times it doesn't. Plus, connecting to other home networked computers can be next to impossible.

But, I located the culprit to be KIS and it can easily be corrected. Do the following on all your machines and your networks will function fine.

1) Right click on the red K on the lower right of your screen
2) Left click settings
3) Left click Protection
4) Left click Firewall
5)Left click Networks
6) Find the adapters for your wired & wireless ports and change them to "Local Network"
7) Close the networks page
😎 Left click Configure Packet Rules
9) Find "Any network activity (Local network)"
10) Right click on it and select edit
11) Check the "inactive" box
12) Left click close

Exit all pages and reboot the machine. You're good to go! (from kaspersky support pages)
Message 145 of 321
ankydu
Guide

Re: R7000 New Firmware 1.0.6.28 released

Does not work for me, when I do all the steps your have given, am still not able to access the router, instead of connection reset I get ERR NETWORK ACCESS DENIED in browsers.

Message 146 of 321
Retired_Member
Not applicable

Re: R7000 New Firmware 1.0.6.28 released

Message 147 of 321
Hot54321
Apprentice

Re: R7000 New Firmware 1.0.6.28 released

None of the developers are responding....
Message 148 of 321
Hot54321
Apprentice

Re: R7000 New Firmware 1.0.6.28 released

Or reinstall windows, then are you sure you acces it.
Message 149 of 321
Killhippie
Prodigy

Re: R7000 New Firmware 1.0.6.28 released

That was from Kapsersky, so other than that I have no idea. It seems more related to Windows/Kaspersky, as I use a Mac and have no issues.

Message 150 of 321
Top Contributors
Announcements

Orbi 770 Series