NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
XS724EM just stopped booting/turning on
Short version is that came in to work and no connections. Found the 10GB switch with no port lights on and no fans running. The tiny power light blinks and the fans nudge a little with each blink but it is not accessible and simply acts dead. No clue how to address this but have reached out to support and exploring local computer repair stores. Working perfectly fine one day and dead the next. There was a MacOS update and being mostly a Mac based studio .....idk but thats the only difference in the day before and today.
RN3220 unable to boot after power outage
I have a ReadyNAS RN3220 that is unable to boot after a power outage. There is no output on the console connection and I cannot get in to the boot menu with or without disks. The ReadyNAS does not show up in RAIDar. The network connection stays up for about 2 seconds before disconnecting and connecting again. I have tried reseating the RAM and unplugging the CMOS battery for a while but this did not help. The power light is blinking green. I have also tried the USB recovery but this does not seem to do anything either (the activity light on the memory stick blinks once at boot then stays off). The unit is under warranty but I was told that problems caused by power outages were not covered... Any help is greatly appreciated!
314: Not receiving Power ON email alerts, but all others work fine
I've configured both of my ReadyNAS 314 (OS 6.6.1 and earlier) to send out email alerts via Gmail, and they have worked reliably. I get alerts for Power Off, Reboot, Backup status, Drive failure, etc. The ONLY alert I have NOT been getting is when the NAS is powered ON. This has never worked, in fact, for any version prior to OS6 6.6.1. I have not yet upgraded to the latest OS6 (6.7, I believe). I have a second NAS 314 that I keep powered off. When it gets turned on by an unauthorized person, I'd like to get alerted that somebody powered it on. The logs do show the Power On event ("System: ReadyNASOS background service started"). Is anybody getting Power ON alerts? How would I enable it?