NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNAS Pro: System temp running out of spec
In the last weeks I did have several times where the CPU temp ran out of spec. What's annoying to me is that the cpu fan runs at maximum 1506 rpm?! Shouldn't it rotate much higher to avoid temp running out of spec?
Any idea what to do? A calibration of the cpu fan is not offered within frontview...
Thanks in advance for any hint!
Any idea what to do? A calibration of the cpu fan is not offered within frontview...
Thanks in advance for any hint!
110 Replies
Replies have been turned off for this discussion
- @chirpa: Did you receive my log files? Any news regarding this issue?
- Please try T11, viewtopic.php?f=51&t=43739
- Since install of T11 CPU Temp went 5-6 degrees down. Seems that beisser was right. Thanks for fixing, chirpa!!!
- Sorry wrong info: the at first sight recognized lower temperature may have been caused by the reboot after upgrading to T11. Now after reading and writing from/to the readynas temp1 is at 64 degrees again and the cpu fan maxes out at around 1500 rpm...
- Can you try 4.2.11, and see if it works better as beisser mentioned? This will help narrow down the issue.
- Will do the test. Anything to consider before/while downgrading to 4.2.11?
- I am still having this issue occasionally with T11:
Temperature sensor 1 reports out of normal range [expected range: 0-65C/32-149F, current: 66.0C/150.8F].
- @bollar: Just to be clear: Do you mean with 4.2.11 or 4.2.13-T11?
- He said ---> Can you try 4.2.11
mattseattle wrote: He said ---> Can you try 4.2.11
He also said: Please try T11, viewtopic.php?f=51&t=43739
I'm confirming that I see the same issue as the OP with T11.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
