This topic has been marked solved and closed to new posts due to inactivity. We hope you'll join the conversation by posting to an open topic or starting a new one.
I'am a bit frustrated cause I didn't succeed in configuring the switch for a small office.
The web-GUI seems to be buggy. It is not possible to tag/untag the ports/lags because it isnt't displayed at all. There is no graphical picture to select my choice.
I tried chrome/firefox/opera/safari.
The firmware is uptodate.
I also tried to do it through the hidden cli/mcli, but it was finally a waste of time.
Finally it works with IE11 and "compatibility mode".
It is not realy smooth and time efficient but it works for most menues.
Only the lag-membership couldn't be activated, so I was not able to double the two ports vor 2GB to the NAS. I very often the menues freeze and you have to reload the page, but patience will be rewarded.
The GS724TP is an elderly 10+ years old switch model. Or do we talk of the GS724TPv2? What firmware version?
Yes, I've seen some similar reports here in the community, this might be indeed a Web UI incompatibility with modern browsers. Or in a few case a problem with some Internet "security" software corrupting JavaScript. IE might be workable. With some more information (what you see or what you can't see - compare https://kb.netgear.com/29997/How-to-create-Layer-2-VLANs-on-NETGEAR-ProSAFE-Switches ) somebody from Netgear might be able to follow up and make engineering check the problem, and fix it.
@bradleyv@LaurentMa please ensure engineering is updating the still supported switches Web UI to be workable on modern browsers. To many customer sites have no more Windows, so no more Internet Explorer.
If we manage a moderator moving this thread to the appropriate Smart / Plus / Click Switches community section we will get the ability to tag the correct model and gain the attention required.
IE11 does work for most - probably in a compatibility mode. However, suggesting to install browsers from the junk departement can't be an option in late 2018 @JohnC_V
Finally it works with IE11 and "compatibility mode".
It is not realy smooth and time efficient but it works for most menues.
Only the lag-membership couldn't be activated, so I was not able to double the two ports vor 2GB to the NAS. I very often the menues freeze and you have to reload the page, but patience will be rewarded.
Best regards; Eli
Model: GS724TPS|24-port ProSAFE Gigabit Stacking Smart Switch with PoE|EOL
