Showing ideas with label Insight AP.
Show all ideas
In the client section of the Insight App, it would be useful to see additional information against each device, for instance, which channel frequency are they using 2.4 to 5Ghz, what channel are they using, what 802.11xx mode are they using, what WPA mode did they authenticate with, the RSSI signal strength, are they using a private MAC address (on a modern phone) - adding fields (and others) such as these into the Client's page would help with diagnosing connection problems. Also would be good to be able to click on a client in the browser and see its history, so when it connect, disconnect, change AP if roamed, connect again etc, so we can see a history of the wireless client with relevant fields that will allow us to diagnose connectivity problems.
... View more
See more ideas labeled with:
-
Insight AP
-
Insight Mobile App
-
Insight Web Portal
Netgear Insight, although I think targeted toward businesses, does not support compliant WPA2 Enterprise. It forces TKIP+AES mixed mode. It is impossible to enforce WPA2 Enterprise on an Insight managed device. The devices are capable, but you have to unmanage a device and set CCMP-AES manually on the local interface, and that AP can never be managed by Insight, or it will change the encryption from AES back to TKIP+AES mixed mode.
... View more
See more ideas labeled with:
-
Insight AP
-
Insight Web Portal
Limiting the antenna power to levels like 100%, 50%, 25%, etc. is ridiculous and severly limits fine tuning it to the local radio enviroment. Please update to allow changing it to values from 1 dBm to 18 (20) dBm like a normal person.
... View more
See more ideas labeled with:
-
Insight AP
Would you please allow the WAC720 access points to be usable on Insight? Without Insight compatibility, impending discontinuation of Business Central will remove cloud management functionality from these devices that were purchased only 1 year ago. Thank you in advance!
... View more
See more ideas labeled with:
-
Insight AP
Insight App and pc portal for OrbiPro6 SXR80 When I configure or troubleshoot via the pc portal via entering in browser the IP address of router, I can see which satellite a device is connected to, or that the device is connected to the router directly. This helps immensely in troubleshooting weak connections or connectivity between devices. Neither the insight pc portal nor the insight app for iPhone provide this level of information. The “Topography” concept in Insight should have forks off of each satellite for devices connected to each satellite, but instead it shows all devices connected directly to the router -which is not true. Can this be improved in the next version of Insight app and pc interface? PS, OrbiPro6 SXR80 is NOT allowed to be entered in “Model” Recommended... input above Thank you.
... View more
See more ideas labeled with:
-
Insight AP
-
Insight Web Portal
I would like to propose a new feature to the Insight Web and Mobile portals. Specifcally, I propose that there be an option to turn off and/or limit to certain channels/devices the "Enable Neighbor AP" scanning. The option to turn it off exists on the local web UI for the WAC540 (the particular Access Point I use) and it is also possible on the local Web UI to turn on/off for just certain Channels. In addition, a user can set the frequency of the scanning (Mild/Medium/Aggressive). I have noticed that this scanning causes regular packet loss for any client connected to the device, which causes regular (brief) freezing on Video/VOIP calls. I tested by removing a device from the Insight Controller and turning off the "Enable Neighbor AP" scanning as well as setting the mild/med/aggressive options. Setting to mild resulted in less packet loss. Setting to agressive causes more frequent packet loss. Once you re-connect a device to the Insight Controller, the option to check "Enable Neighbor AP" is grayed out on the local Web UI. It's also not possible on the Insight Web portal or the Insight Mobile app to set "Enable Neighbor AP" option. With all the people using these devices to connect to/from remote locations (as a result of COVID), frequent, even if brief, freezes in responsiveness mean that this Insight feature gap represents a significant limitation of the Insight Controller.
... View more
See more ideas labeled with:
-
Insight AP
-
Insight Mobile App
-
Insight Web Portal
Firmware V5.10.0.3 The old FVS338 had all of the below features and worked great. I'm surprised and very disappointed they are missing from the BR500. Custom services are always enabled unless deleted. An enable/disable check box on each service would be very useful. Currently you have to delete the custom service to disable and create the custom service from scratch to enable. This extremely inconvenient. There is a severe security problem with port forwarding custom services. Open ports are exposed to the whole world. The ability to limit port exposure to a specific external IP or a range of specific IPs would solve this security problem. It is extremely important to implement this safeguard.
... View more
See more ideas labeled with:
-
Insight AP
Status:
New Idea
Submitted on
2020-05-22
05:22 PM
Submitted by
Retired_Member
on
2020-05-22
05:22 PM
It would be great, if there is a feature for the BR500 and WAC540 to allow us to change the client name, which we can then recognize as to which devices are on the network, etc., through the Insight Application and also on the admin page and to have a feature as well on these two devices to have parental controls as well, if businesses are using it for their work, whilst working from home, etc. Also, another suggestion of a feature under "Block Sites" in the back end of the admin page that you can just type "Pornography", "Explicit Content", which it will block all sites internationally on the website, instead of us having to mention the "Keyword and Domain Name" on it. Businesses would like to have it as well, because they want their employees to work safely on the network, etc. Lastly, it would be great if the WC540 could be supplied with a Power Supply in the box as well, instead of purchasing it separately. Thank you.
... View more
See more ideas labeled with:
-
Insight AP
-
Insight Mobile App
WBC502 with firmware 5.8.1.7 Access Point (and Client Bridge) mode is only available in the Stand Alone mode. Can AP be available/manageable through Insight?
... View more
See more ideas labeled with:
-
Insight AP
The current suite of SmartCloud products (VPN Router, GC-switches, WAC-access points) does not include an option for Netgear Armor (Bitdefender) with Instrusion Protection System features. Some of Netgear's other products, such as the Nighthawk AC-routers and Orbi Mesh-routers include the Netgear Armor product. It is diffucult to sell the BR-500 product without a Netgear-Armor-like product available as an option. Customers can buy other routers, such as the ASUS RT-series and perform similar wireless-mesh functions using Ethernet backhaul, for lower cost and get the IPS features and protection. See https://www.asus.com/AiProtection/#Supported%20Models.
... View more
See more ideas labeled with:
-
Insight AP
-
Insight Switch
Status:
New Idea
Submitted on
2019-11-27
12:02 AM
Submitted by
eric_lindeman
on
2019-11-27
12:02 AM
Request to support multiple public IP addresses that can be individually NAT’d or routed to internal VLANs or different hosts in the DMZ
... View more
See more ideas labeled with:
-
Insight AP
Add mac address and name ie conference room IP phone And others, (my old r6500 ac home router dose... ) However, at work or via webui adding devices with a predefined IP address.. or away from office, can add and debug ip. Phones or etc..
... View more
See more ideas labeled with:
-
Insight AP
-
Insight Mobile App
-
Insight Switch
-
Insight Web Portal
We have an email inbox for the status of all system alerts, all software we use on other sites correctly identifies the system alerting and the device and status in the subject so we can react to the information as soon as it comes up, with the exception of the Insight alerts. Would it possible for some kind developer in the Insights system to add the device name label to the front of each alerting email's subject line so we can have a full set of systems working like this without having to go through each individual email body text to see what it relates to, please ?
... View more
See more ideas labeled with:
-
Insight AP
-
Insight Mobile App
-
Insight Switch
-
Insight Web Portal
I have a BR500 and purchased the Insight Instant VPN service for it. Overall, the Insight Instant VPN service is nice as I can manage who I let into the VPN and It's an easy way to get into my routers network remotely. While I can get the VPN to work from my home Windows based PC, I also have several Linux machines that I would like to be able to connect to the VPN with. I've already been in contact with support and the conclusion was that this is somehow not supported or they had no settings they could give me to manually configure a connection. I'd be happy with just some settings that I could use to manually configure a connection to the Inisight Instant VPN on Linux (e.g., Protocol, Gateway, etc.). If for some reason there is something that can't be disclosed then a Linux version of the app would be great too. I just want to be able to use the service through my Linux machines.
... View more
See more ideas labeled with:
-
Insight AP
Hi,
This idea is for Access Point WAC 505/510. The product is not in the list.
In standalon mode, I can schedule different activation times of the wifi.
In Insight Mode, the option disappears and it's impossible to do this.
I can not believe Netgear forgot that. Netgear support and the sales department told me whether or not the POE was enabled on the switch port. It's a joke ?
The scheduling option must be implemented. At the moment, I'm using my WAC505 in standalone mode.
... View more
See more ideas labeled with:
-
Insight AP
-
Insight Web Portal
We're missing the ability to generate CSRs with 2048 bit on the Netgear Business products (like the Smart Manged Plus, Smart Managed Pro, Managed Switches, coming-up Routers like the BR500, and solo the ability to generate self-signed certificates accordingly.
... View more
See more ideas labeled with:
-
Insight AP
-
Insight Switch
-
Nighthawk Switch
-
Smart Switch
Please update the version of tcpdump that's included in the WAC720 and WAC510 access point (and other WiFi routers/access points). The version currently installed relies on a buggy libpcap that incorrectly processes the Prism radio header. As a result, running a packet capture on the radio interface results on undecodable frames. Please note that the problem is in the pcap library, not tcpdump (the pcap library is static linked into tcpdump). This is the version of tcpdump currently installed:
# tcpdump -V tcpdump version 3.9.8 libpcap version 1.1.1
This is what happens when the current version of tcpdump is run on a radio interface (notice the decodes are useless):
# tcpdump -i mon0 -n
tcpdump: WARNING: mon0: no IPv4 address assigned tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on mon0, link-type PRISM_HEADER (802.11 plus Prism header), capture size 96 bytes 16:25:39.368772 [|802.11] 16:25:39.395357 [|802.11] 16:25:39.396201 [|802.11] 16:25:39.408759 [|802.11] 16:25:39.415976 [|802.11] 16:25:39.416788 [|802.11] 16:25:39.448778 [|802.11]
This is an updated version of tcpdump:
# /tmp/tcpdump -V tcpdump version 4.7.4 libpcap version 1.7.3
This is what happens if I use an updated version of tcpdump (notice the decodes are sensible):
# /tmp/tcpdump -i mon0 -n tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on mon0, link-type PRISM_HEADER (802.11 plus Prism header), capture size 262144 bytes 16:26:44.309540 Probe Request (Carioca_5G) [6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 Mbit] 16:26:44.319537 Probe Request (Carioca_5G) [6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 Mbit] 16:26:49.047216 Probe Request () [6.0* 9.0 12.0* 18.0 24.0* 36.0 48.0 54.0 Mbit] 16:26:49.048028 Acknowledgment RA:9c:3d:cf:ea:67:69 16:26:49.087172 Probe Request () [6.0* 9.0 12.0* 18.0 24.0* 36.0 48.0 54.0 Mbit] 16:26:49.088047 Acknowledgment RA:9c:3d:cf:ea:67:69 16:26:49.127191 Probe Request () [6.0* 9.0 12.0* 18.0 24.0* 36.0 48.0 54.0 Mbit] 16:26:49.127972 Acknowledgment RA:9c:3d:cf:ea:67:69
You can download the updated version of tcpdump using this command: curl -k -o /tmp/tcpdump https://raw.githubusercontent.com/andrew-d/static-binaries/master/binaries/linux/arm/tcpdump
... View more
See more ideas labeled with:
-
Insight AP
-
SMB AP
ALL FIRMWARE should be updated. More info: https://betanews.com/2017/10/16/krack-wpa2-security-vulnerability/
... View more